So for a Valentine’s Post, I wanted to do something that would work for Valentine’s, but also work for everyday, hence the idea for this skirt was born….but chevron, or zig zag, fabric is a little hard to come by. I thought it’d fun to attempt to make some. I’m sure there are lots of tutorials on this and I probably should have looked one up…but oh well.
First you need striped fabric. I got this from PoppySeedFabrics and it’s actually Dr. Seuss Christmas fabric, but I loved how it had wonky lines (although that made it a little harder to match up in the long run). I had 2 yards, but I’m pretty small, so you might need more than that.
Then you fold your fabric because you need to cut a diagonal line (it’s called cutting on the bias).
Then to make it easier to cut I folded it back on itself and cut the fold into strips. Mine were 3 inches wide.
Then you need to cut strips from the other side – that way some of your strips have lines slanting up and some have lines slanting down. Then alternate the strips – laid out on the floor it looks like this:
Then comes the sewing – it’s not hard, just a little tedious. Sew all the strips together. Make sure your lines match up, like so. Then get a helper to hold up the newly reconstructed piece of fabric:
At this point I wrapped it around myself – very un-technical way to measure. It’s a little big – time to add pleats to the waist.
Since there are lots of seams, this isn’t hard. Just pick a few (I made 4 pleats) and sew a bigger seam allowance at the top and then taper down. You can see it in the picture. I actually ended up making it a lot longer in length after I took the picture, to smooth it into the seam better.
Next I thought it needed stability at the top, so I cut a strip of fabric that would reach across the entire top. I ironed on fusible interfacing to make it a little stiffer. Then I sewed it to the top of the skirt, right sides together:
Then flip it open and press the seam really well:
Then flip it to the inside of the skirt and press that seam again – see how that makes the band on the inside:
Next up, don’t be scared, add in a zipper on the side. If you can sew a straight line, you can sew in a zipper. Just lay it on top of one of the sides, with the zipper upside down, and sew it down (see the seam in the picture).
See, then when you flip the zipper right-side up, it turns the edge in and looks pretty. Sew down the other side of the zipper in the same way. Then sew that seam the rest of the way down, right sides together. Then turn it right-side out and voila, done!
Mine needed a hook and eye at the top of the zipper. The zipper in action ( I didn’t plan well and the two sizes of the big piece of chevron were both slanting down – so they don’t “zig” at the zipper seam – oh well)
Now I’m all ready to be decked out for Valentine’s (and any) day – –
also, here are some other ways I have worn the red chevron skirt: