So let's talk how-to and start the tutorial:
First, fabric choices - which for me is always one of the hardest things. You'll need a lining and then several choices to rip into strips for the outside.
I wish I would have kept track of yardage. I'm thinking maybe 1/2 yard of about 3 fabrics for the outside. Anyways, cut your outside fabric into strips. I used different size strips, but you could make them all the same if you want. Just cut slits at the edge of the fabric and then rip it all the way to give that frayed edge look.
Now, open up the folded piece of fusible fleece and it should be a really long rectangle. With the bumpy side (the side that has the glue on it) up, lay out strips of fabric. Cover the whole thing. This picture shows a couple of different fabrics, but I ended up laying out all gray in this direction:
Now, the weaving part. Pull back every other strip about half way (I started in the middle and worked my way to each end). Then lay a strip of fabric across. Then with the ones you pulled back, fold them back down on top of the new strip. Then pull up every other strip again, this time choosing the ones you didn't choose before. Hope that makes sense. Lay a strip down. Keep repeating.
You should have a long rectangle of pieced together fabric. Cut a piece of fabric that exact size out of your lining fabric. Fold it in half and sew down (with the fold at the bottom), but leave a spot at the bottom, depending on how big you want the bottom of the bag, as shown:
Then continue sewing to catch all those layers. Just extend the line of stitches all the way to the bottom.
If you flip the lining right-side out, you should get a triangle that helps to form sides and a bottom on your bag. This is the easy way to make a bag with a bottom without actually making pieces for the bottom or sides - see:
Repeat those steps for the piece of outside fabric to make it just like your lining. Here's what that'll look like:
Now, I added a ruffle to the top of this bag. Optional, but it was fun - I tried out my ruffler foot which I'm still getting used to:
I attached it about a half inch from the top of the bag, raw edges together:
Then as shown in the picture above, turn the outside right-side out and the lining wrong-side out and shove the outside of the bag into the lining. Be sure to push the handles in too, as shown in the picture below. Then sew all along that top edge (noted by the white dash) being sure to leave a spot open for turning.
I am really loving the raw-edge woven look of this bag, and it came together fairly quickly.
I made this bag for the blog conference I just went to, but I actually ended up using the bag on the left (from Amy Butler Style Stitches bag #2) instead - funny, huh. And in fact I brought that bag but at the conference I didn't use it either. Who knew!